Self Study Program 269 – Data transfer on CAN data bus II Drivetrain CAN data bus Convenience infotainment CAN data bus

VAG SSP 269. The use of different CAN data bus systems in a motor vehicle and the utilisation of data in different networks by different systems sets new demands on diagnosis and fault finding. SSP 238 covers the basics of the CAN data bus system. This information is extended with SSP 269 to concentrate on the technical realisation of both data bus types.

The basic requirements for fault finding are explained and a flow chart shows the procedure necessary for systematic fault finding.

At the end of this SSP, practical examples of faults are described and dealt with individually. The procedure for diagnosing faults is explained and details are given as to their cause and rectification.

Special attention is paid to fault finding with vehicle diagnosis, testing and information system VAS 5051. Next step will be introduction to and diagnosis of practical fault conditions.

CONTENTS

  • Introduction
  • Overview
    • Overview
    • Differential data transfer
    • Signal level & resistances
  • System overview
    • Drivetrain CAN data bus
    • Convenience/ infotainment CAN data bus
  • Entire system
  • CAN service
    • General
    • Drivetrain CAN data bus
    • Convenience/ infotainment CAN data bus
  • Test yourself
  • Glossary

The self-study programme shows the design and function of new developments! The contents will not be updated. For testing, adjusting and repair instructions, please refer to the relevant service literature.

Language: English
Format: PDF
Pages: 60

Self Study Program 269 – Data transfer on CAN data bus II Drivetrain CAN data bus Convenience/ infotainment CAN data bus PDF free online