Seat 7-speed dual clutch gearbox 0CW Workshop Manual

Ateca 2017- Ibiza 2016- Ibiza ST 2016- Leon 2013- Leon ST 2013-. Edition 07.2016. Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.

List of Workshop Manual Repair Groups

Repair Group
00 – Technical data
30 – Clutch
34 – Controls, housing
35 – Gears, shafts
39 – Final drive – front differential

CONTENTS

• 00 – Technical data
  • 1 Identification
    • 1.1 Gearbox identification
  • 2 Safety instructions
    • 2.1 Safety precautions when working on vehicles with a start/stop system
    • 2.2 Safety precautions when using testers and measuring instruments during a road test
    • 2.3 Notes on tow-starting and towing
    • 2.4 General safety regulations
  • 3 Repair notes
    • 3.1 General notes
    • 3.2 General repair instructions
    • 3.3 Gaskets and seals
    • 3.4 Bolts, nuts
  • 4 Technical data
    • 4.1 Capacity
    • 4.2 Allocation gearbox – engine
  • 5 Overview – power transmission
    • 5.1 Transmission layout – front-wheel drive
• 30 – Clutch
  • 1 Clutch action
    • 1.1 Assembly overview – clutch engagement
    • 1.2 Removing and installing clutch engagement
    • 1.3 Adjusting clutch engagement
  • 2 Coupling unit
    • 2.1 Assembly overview – dual clutch
    • 2.2 Installing dual clutch
    • 2.3 Removing dual clutch
    • 2.4 Renewing input shaft seal
    • 2.5 Renewing oil seal for inner input shaft
• 34 – Controls, housing
  • 1 Mechatronic unit
    • 1.1 Exploded view – mechatronic unit
    • 1.2 Removing and installing mechatronic unit
    • 1.3 Setting mechatronic unit to removal position by hand
    • 1.4 Renewing bellows with clutch actuator
  • 2 Gear selection mechanism
    • 2.1 Exploded view – selector mechanism
    • 2.2 Assembly overview – gear lever knob and cover
    • 2.3 Emergency release from position P
    • 2.4 Removing and installing selector mechanism
    • 2.5 Adjusting selector mechanism
    • 2.6 Removing and installing selector lever cable
    • 2.7 Selector lever control cable: checking and adjusting
    • 2.8 Removing and installing selector lever handle
    • 2.9 Moving pushbutton to installation position in the handle
    • 2.10 Renewing oil seal for selector shaft
  • 3 Gearbox : removing and fitting
    • 3.1 Specified torques for gearbox
    • 3.2 Removing gearbox
    • 3.3 Installing gearbox
  • 4 Engine/gearbox mountings
    • 4.1 Exploded view – assembly mountings
  • 5 Transporting gearbox
  • 6 Dismantling and assembling gearbox
    • 6.1 Schematic overview – gearbox
    • 6.2 Dismantling and assembling gearbox
  • 7 Gearbox housing, clutch housing
    • 7.1 Repairing the gearbox housing
    • 7.2 Repairing clutch housing
  • 8 Installing to engine and gearbox support
  • 9 Gearbox oil
    • 9.1 Draining and filling gearbox oil
    • 9.2 Draining and filling hydraulic fluid for mechatronic unit . . .
• 35 – Gears, shafts
  • 1 Protect
  • 2 Output shaft
    • 2.1 Assembly overview – output shaft
    • 2.2 Dismantling and assembling output shaft 1
    • 2.3 Dismantling and assembling output shaft 2
    • 2.4 Dismantling and assembling output shaft 3
    • 2.5 Determining the thickness of the shim
  • 3 Parking Lock
    • 3.1 Removing and installing cover for parking lock
    • 3.2 Removing and installing parking lock
• 39 – Final drive – front differential
  • 1 Oil seals
    • 1.1 Fitting location overview – seals
    • 1.2 Renewing left oil seal
    • 1.3 Renewing right oil seal

Language: English
Format: PDF
Pages: 245

Seat 7-speed dual clutch gearbox 0CW Workshop Manual