Seat 7-speed dual clutch gearbox 0GC Workshop Manual

Seat

Edition 03.2017. Ateca 2017- Leon 2013- Leon ST 2013-. Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.

List of Workshop Manual Repair Groups

Repair Group
00 – Technical data
30 – Clutch
34 – Controls, housing
35 – Gears, shafts
39 – Final drive – differential

CONTENTS

  • 00 – Technical data
    • 1 Identification
      • 1.1 Gearbox codes
      • 1.2 Identification of bevel box
    • 2 Technical data
      • 2.1 Filling quantity
      • 2.2 Allocation gearbox – engine
    • 3 Security standards
      • 3.1 General safety regulations
      • 3.2 Safety precautions when working on vehicles with start/stop system
      • 3.3 Safety precautions during road tests in which testing and measuring equipment is used
      • 3.4 Safety measures when tow-starting and towing
    • 4 Repair instructions
      • 4.1 General notes
      • 4.2 Cleaning rules
      • 4.3 General repair notes
      • 4.4 Contact corrosion
  • 30 – Clutch
    • 1 Clutch
      • 1.1 Assembly overview – dual clutch
      • 1.2 Removing and installing clutch end cover
      • 1.3 Removing dual clutch
      • 1.4 Installing dual clutch
  • 34 – Controls, housing
    • 1 Mechatronic unit
      • 1.1 Exploded view – mechatronic unit
      • 1.2 Removing and installing oil sump
      • 1.3 Removing and installing mechatronic unit
    • 2 Selector mechanism
      • 2.1 Exploded view – selector mechanism
      • 2.4 Moving button to installation position in the handle
      • 2.5 Removing and installing selector mechanism
      • 2.6 Checking selector mechanism
      • 2.7 Selector lever control cable: removing and fitting
      • 2.8 Selector lever control cable: checking and adjusting
      • 2.9 Renewing oil seal for parking lock
    • 3 Gearbox: removing and fitting
      • 3.1 Removing gearbox
      • 3.2 Installing gearbox
      • 3.3 Specified torques for gearbox
    • 4 Bevelled gears
      • 4.1 Removing bevel box
      • 4.2 Installing bevel box
      • 4.3 Tightening torques for bevel box
    • 5 Assembly bracket
      • 5.1 Installation overview – assembly mountings
    • 6 Transport of gearbox
    • 7 Installing to engine and gearbox support
    • 8 Gear oil section
      • 8.1 Overview – gear oil circuit
      • 8.2 Removing and installing gearbox oil cooler
      • 8.3 Gear oil filter: dismounting and assembly
      • 8.4 Removing and installing motor for auxiliary hydraulic pump 1 for gear oil V475
    • 9 Gear oil
      • 9.1 Overview drain and inspection plugs
      • 9.2 Tools for changing gear oil
      • 9.3 Checking gear oil level
      • 9.4 Gear oil: emptying and filling
  • 35 – Gears, shafts
    • 1 Dismantling and assembling gears and shafts
  • 39 – Final drive – differential
    • 1 Seals
      • 1.1 Fitting location overview – seals
      • 1.2 Renewing left oil seal
      • 1.3 Renewing right oil seal
    • 2 Differential:
      • 2.1 Removing and installing flange shaft (right-side)
    • 3 Gear oil
      • 3.1 Check gear oil level
      • 3.2 Draining and filling gear oil
    • 4 Components of bevel box
      • 4.1 Assembly overview – components of bevel box
      • 4.2 Renewing bevel box seals
      • 4.3 Renewing right oil seal
      • 4.4 Renewing left oil seal
      • 4.5 Replace needle bearing for right-hand flange shaft
      • 4.6 Removing and installing output flange
    • 5 Gearbox control
      • 5.1 Fitting location overview – gearbox control

Language: English
Format: PDF
Pages: 123

Seat 7-speed dual clutch gearbox 0GC Workshop Manual