Volvo MID 179 FH Version 2 – Fms Gateway fault codes
| Error code | Parameter | Description |
| Fms Gateway control unit | ||
| MID 179 PPID 152 FMI 12 | The number of restarts of the control unit. | The code is registered and the system reboots in case of an internal software error. |
| MID 179 SID 231 FMI 2 | Data feed SAE J1939. | No data is transmitted between control units via the data channel. Breakage or partial damage to the data channel wiring, oxidation or damage to the contacts in the data channel connectors. |
| MID 179 SID 240 FMI 2 | Program memory | Software failure or defective storage circuit in the gateway control unit FMS. |
| MID 179 SID 250 FMI 9 | Data feed SAE J1708. | Gateway Fms within a certain time does not receive a date and time message from the dashboard control unit (MID140) by data channel. Damaged data channel wiring between the blocks. |
| MID 179 SID 253 FMI 2 | Gauge memory Eeprom | Programming error or gateway storage circuit malfunction FMS. |
| MID 179 PSID 201 FMI 9 | Data Link Disruption SAE J1939 with car control unit ( MID144). | Gateway control unit Fms (MID179) does not receive signals from the car control unit (MID 144) over the data channel SAE J1939. Broken or partial damage to data wire between the blocks. |
| MID 179 PSID 202 FMI 9 | Data Link Disruption SAE J1939 with dashboard control unit ( MID140) | Gateway control unit FMS (MID179) does not receive date and time messages over the data channel SAE J1939 from the dashboard control unit (MID140). Broken or partial damage to data wire between the blocks. |
| MID 179 PSID 232 FMI 2 | External channel CAN SAE J1939. | Gateway control unit Fms cannot work through external data channel. Open, short to ground or to a higher voltage wiring the external data channel. DTC is always active if to gateway Fms no external transport information system is connected. |