Volvo MID 166 Fault Codes DTC
Truck Fault Code, DTC Parameter, Description of DTC
Tire Pressure Monitoring System Control Unit
MID166 – SID231 – FMI 2
Data Channel SAE J1939.
No messages in the data channel. Open or partial damage to the wiring of the data channel. Damaged or oxidized contacts in the connectors of the data channel. May be a violation in the instrument panel software.
MID166 – SID231- FMI 9
Data Channel SAE J1939.
Data from the vehicle control unit (MID144) or from the brake control unit (MID136) is missing or incorrect. May be a violation in the instrument panel software. Check the fault codes in blocks MID144 and MID136.
MID166 – SID253 – FMI 2
EEPROM calibration memory.
Pressure monitoring system control unit is not programmed or has an error during programming. Re-program the control unit.
MID 166 SID 253 FMI 13
EEPROM calibration memory.
Control unit is not fully calibrated. 1 or more tire pressure sensors are not programmed in the control unit.
MID166 – SID253 – FMI 14
EEPROM calibration memory.
Selected wheel or the selected axle is not supported by the control unit.
MID166 – PSID1 – FMI 0
Tire pressure sensors 1
Tire pressure too high.
MID166 – PSID1 – FMI 1
Tire pressure sensors 1
Tire pressure too low.
MID166 – PSID1 – FMI 9
Tire pressure sensors 1
No information received from the pressure sensor for 64 minutes while the vehicle is stationary.
MID166 – PSID1 – FMI 10
Pressure sensors 1
Air leak from the tire.
MID166 – PSID1 – FMI 12
Tire pressure sensors 1
Tire pressure sensor is defective or missing.
MID166 – PSID2 – FMI 0
Tire pressure sensors 2
Pressure too high.
MID166 – PSID2 – FMI 1
The Tire Pressure Sensors two
The Tire Pressure too low.
MID166 – PSID2 – FMI 9
Tire Pressure Sensors two
Pressure Sensor no info for 64 minutes while the vehicle is stationary.
MID166 – PSID2 – FMI 10
The Tire Pressure Sensors two
An Air leak from the tire.
MID166 – PSID2 – FMI 12
Tire Pressure Sensors two
Tire Pressure Sensor is defective or missing.
MID166 – PSID3 – FMI 0
Pressure Sensors three
The Tire Pressure too high.
MID166 – PSID3 – FMI 1
The Tire Pressure Sensors three
The Tire Pressure too low.
MID166 – PSID3 – FMI 9
Tire Pressure Sensors three
The Pressure Sensor no info for 64 minutes while the vehicle is stationary.
MID166 – PSID3 – FMI 10
The Tire Pressure Sensors three
An Air leak from the tire.
MID166 – PSID3 – FMI 12
The Tire Pressure Sensors 3
Pressure Sensor is defective or missing.
MID166 – PSID4 – FMI 0
Four tire Pressure Sensors
The Tire Pressure too high.
Truck Fault Code, DTC Parameter, Description of DTC
Tire Pressure Monitoring System Control Unit
MID166 – PSID4 – FMI1
Four tire pressure sensors
Tire pressure too low.
MID166 – PSID4 – FMI9
Four tire pressure sensors
No information is received from the pressure sensor for 64 minutes while the vehicle is stationary.
MID166 – PSID4 – FMI10
Four tire pressure sensors
Air leak from the tire.
MID166 – PSID4 – FMI12
Fourtire pressure sensors
The tire pressure sensor is defective or missing.
MID166 – PSID5 – FMI0
Tire pressure sensors five
Tire pressure too high.
MID166 – PSID5 – FMI1
Tire pressure sensors five
Tire pressure too low.
MID166 – PSID5 – FMI9
Tire pressure sensors five
No information is received from the pressure sensor for 64 minutes while the vehicle is stationary.
MID166 – PSID5 – FMI10
Tire pressure sensors five
Air leak from the tire.
MID166 – PSID5 – FMI12
Tire pressure sensors five
The tire pressure sensor is defective or missing.
MID166 – PSID6 – FMI0
Tire pressure sensors six
Tire pressure too high.
MID166 – PSID6 – FMI1
Tire pressure sensors six
Tire pressure too low.
MID166 – PSID6 – FMI9
Tire pressure sensors six
No information is received from the pressure sensor for 64 minutes while the truck is stationary.