Toyota Venza 2009 – 2011 Body Collision Repair Manual

This repair manual has been prepared to provide essential information on body panel repair methods (including cutting and welding operations, but excluding painting) for the TOYOTA VENZA.
Applicable models: AGV 10, 15 series. GGV 10, 15 series. This manual consists of body repair methods, exploded diagrams and illustrations of the body components and other information relating to body panel replacement such as handling precautions, etc. However, it should be noted that the front fenders of this TOYOTA model are bolted on and require no welding. When repairing, do not cut and join areas that are not shown in this manual. Only work on the specified contents to maintain body strength.

Body construction will sometimes differ depending on specifications and country of destination. Therefore, please keep in mind that the information contained herein is based on vehicles for general destinations.

For the repair procedures and specifications other than collision damaged body components of the TOYOTA VENZA refer to the repair manuals. If you require the above manuals, please contact your TOYOTA dealer.

All information contained in this manual is the most up-to-date at the time of publication. However, specifications and procedures are subject to change without prior notice.


  • INTRODUCTION Explanation of general body repair. Views of welded panel replacement instructions.
  • BODY PANEL REPLACEMENT Instructions for replacing the weld panels from the white body condition, from which bolted parts have been removed, with individual supply parts.
  • BODY DIMENSIONS Body aligning measurements.
  • COATING Scope and type of anti-rust treatment, etc. together with weld panel replacement.

Language: English
Format: PDF
Pages: 162

Toyota Venza 2009 – 2011 Body Collision Repair Manual