Skoda Octavia Workshop Manual (S00.5107.50.20 Edition 08.96) 1.8L 92kW Engine Motronic Fuel Injection and Ignition System
Skoda Octavia Workshop Manual (S00.5107.50.20 Edition 08.96) 1.8 ltr./92 kW Engine Motronic Fuel Injection and Ignition System PDF
CONTENTS
01 Self-Diagnosis
- Self-diagnosis
- Features of self-diagnosis
- Technical data of self-diagnosis
- Connecting vehicle system tester V.A.G 1552 and selecting engine electronics control unit
- Interrogating and erasing fault memory
- Fault table
- Fault table from fault code 00515 to 01165
- Fault table from fault code 01182 to 16502
- Fault table from fault code 16504 to 17736
- Fault table from fault code 17913 to 18262
- Final control diagnosis
- Measured value blocks
- Reading measured value block
- Lists of display groups
- Display group 000 to 007
- Display group 008 to 099
24 Fuel Formation/Fuel Injection
- Servicing fuel injection system – valid > 07.97
- Overview of fitting locations
- Servicing fuel injection system – valid 08.97 >
- Overview of fitting locations
- Servicing fuel injection system
- Disassembling and assembling top part of intake manifold – valid > 07.97
- Disassembling and assembling top part of intake manifold – valid 08.97 >
- Disassembling and assembling bottom part of intake manifold – valid > 07.97
- Removing and installing air filter, air mass meter
- Disassembling and assembling bottom part of intake manifold – valid 08.97 >
- Removing and installing air filter, air mass meter and intake air temperature sender
- Safety precautions
- Rules for cleanliness
- Technical data
- Testing components and functions
- Testing idling speed
- Testing fuel tank ventilation
- Testing throttle valve control unit
- Testing idling speed switch
- Testing throttle valve positioner sender and throttle valve potentiometer
- Testing intake air temperature sender – valid > 07.97
- Testing intake air temperature sender – valid 08.97 >
- Testing engine speed sender
- Testing coolant temperature sender (G62)
- Testing voltage supply for control unit
- Testing fuel pressure regulator and holding pressure
- Testing injected quantity, leaktightness and spray pattern of injectors
- Testing injectors – valid > 07.97
- Testing injectors – valid 08.97 >
- Testing fuel pump relay and actuation
- Testing air mass meter – valid > 07.97
- Testing lambda control
- Replacing, coding and adapting engine control unit
- Testing additional signals
28 Ignition System
- Servicing ignition system
- Testing components and functions
Language: English
Format: PDF
Pages: 196