Skoda Octavia Workshop Manual 1.8L 92kW Engine – Motronic Fuel Injection and Ignition System
Skoda Octavia Workshop Manual 1.8 ltr./92 kW Engine – Motronic Fuel Injection and Ignition System PDF free online
CONTENTS
01 Self-Diagnosis
- Self-diagnosis
- Features of self-diagnosis
- Technical data of self-diagnosis
- Connecting vehicle system tester V.A.G 1552 and selecting engine electronics control unit
- Interrogating and erasing fault memory
- Fault table
- Fault table from fault code 00515 to 01165
- Fault table from fault code 01182 to 16502
- Fault table from fault code 16504 to 17736
- Fault table from fault code 17913 to 18262
- Final control diagnosis
- Measured value blocks
- Reading measured value block
- Lists of display groups
- Display group 000 to 007
- Display group 008 to 099
24 Fuel Formation/Fuel Injection
- Servicing fuel injection system – valid >07.97
- Overview of fitting locations
- Servicing fuel injection system – valid 08.97 >
- Overview of fitting locations
- Servicing fuel injection system
- Disassembling and assembling top part of intake manifold – valid > 07.97
- Disassembling and assembling top part of intake manifold – valid 08.97 >.
- Disassembling and assembling bottom part of intake manifold – valid > 07.97
- Removing and installing air filter, air mass meter
- Disassembling and assembling bottom part of intake manifold – valid 08.97 >
- Removing and installing air filter, air mass meter and intake air temperature sender
- Safety precautions
- Rules for cleanliness
- Technical data
- Testing components and functions
- Testing idling speed
- Testing fuel tank ventilation
- Testing throttle valve control unit
- Testing idling speed switch
- Testing throttle valve positioner sender and throttle valve potentiometer
- Testing intake air temperature sender – valid >- 07.97
- Testing intake air temperature sender – valid 08.97 >
- Testing engine speed sender
- Testing coolant temperature sender (G62)
- Testing voltage supply for control unit
- Testing fuel pressure regulator and holding pressure
- Testing injected quantity, leaktightness and spray pattern of injectors
- Testing injectors – valid >07.97
- Testing injectors – valid 08.97 >
- Testing fuel pump relay and actuation
- Testing air mass meter – valid > 07.97
- Testing air mass meter – valid 08.97 >
- Testing intake system for leaks (unmetered air)
- Testing lambda control
- Poor driving characteristics after cold start
- Testing function
- Testing lambda probe heater
- Testing lambda probe signal cable and actuation
- Removing and installing lambda probe
- Replacing, coding and adapting engine control unit
- Replacing engine control unit
- Coding engine control unit
- Adapting engine control unit to electronic immobilizer
- Adapting engine control unit to throttle valve control unit
- Performing basic setting of engine control unit
- Testing additional signals
- Testing AC compressor cut-off
- Testing engine speed adaptation by switching on air conditioning
- Testing selector lever position of automatic gearbox
- Testing engine speed signal
- Testing throttle valve position
- Testing vehicle speed signal
- Testing gearbox control signal during gearshift
- Testing variable intake manifold changeover – valid 08.97
- Testing vacuum system
- Testing variable intake manifold changeover valve
- Testing signal from power steering pressure switch
28 Ignition System
- Servicing ignition system
- Overview of components
- Safety precautions
- Technical data of ignition system
- Testing components and functions
- Testing twin-spark ignition system with two ignition coils
- Testing knock sensors
- Testing Hall sender
- Testing camshaft adjuster
- Testing solenoid valve of camshaft adjuster
Language: English
Format: PDF
Pages: 196