Skoda Octavia Workshop 1.9L 81kW (TDI) Engine, Fuel Injection and Glow Plug System
Skoda Octavia Workshop 1.9-ltr./81 kW (TDI) Engine, Fuel Injection and Glow Plug System PDF free online
CONTENTS
01 Self-Diagnosis
- Self-Diagnosis
- Properties of the self-diagnosis
- Technical data of self-diagnosis
- Connecting tester V.A.G 1552 and select engine electronics control unit
- Interrogating and erasing fault memory
- Fault table
- Actuator diagnosis
- Performing actuator diagnosis
- Basic setting
- Coding control unit
- Readiness code
- Reading readiness code
- Generate readiness code
- Measured value blocks
- Reading measured value block
- Display nominal values for general vehicle inspection
- Display nominal values for injection pump
- Display nominal values for engine idling
- Display nominal values for exhaust gas recirculation
- Display nominal values for temperature sensor
- Display nominal values for automotive power
- Display nominal values for charge pressure control
23 Fuel Formation/Injection
- Servicing a diesel direct fuel injection system
- Safety measures
- Rules for cleanliness
- Overview of fitting locations
- Servicing injection pump
- Servicing fuel filter
- Servicing throttle mechanism
- Adjusting sender for accelerator pedal position
- Disassembling and assembling air filter
- Removing and installing injection pump
- Dynamically testing and setting commencement of injection
- Removing and installing and testing injection nozzles
- Replacing O-ring at cover for injection timing device
- Wiring and Component Test with Test Box V.A.G 1598/22
- Replacing engine electronics control unit
- Inspecting the charge air pressure system
- Inspecting charge air pressure
- Inspecting charge pressure control solenoid valve (N75)
- Inspecting intake manifold temperature sender (G72)
- Inspecting intake manifold pressure sender (G71) and altitude sende
- Testing injection control
- Testing injection timing device control range
- Testing the commencement of injection valve (N108)
- Inspecting fuel temperature sender
- Inspecting exhaust gas recirculation system
- Hose layout plan for the charge pressure regulation, the exhaust gas recirculation and intake manifold flap
- Inspecting exhaust gas recirculation
- Inspecting electromagnetic exhaust gas recirculation valve
- Inspecting air mass meter (G70)
- Inspecting control units input quantities
- Testing voltage supply for diesel direct injection system
- Testing engine speed sender (G28)
- Testing needle lift sender (G80)
- Testing coolant temperature sender (G62)
- Testing brake light switch (G149) and brake pedal switch (N146)
- Testing modulating piston movement sender and metering adjuster
- Testing accelerator pedal position sender (G79)
- Testing auxiliary signals
- Testing signals from/to the air conditioning system
- Testing clutch pedal switch (F36)
- Testing speed signal
- Testing engine speed signal
- Activating or deactivating cruise control system
- Testing cruise control system
- Testing databus
- Servicing intake manifold
- Inspecting the change-over of the intake manifold flap
28 Glow plug system
- Inspecting glow plug system
- Inspecting proper operation
- Inspecting glow plugs
- Inspecting glow period warning lamp
Language: English
Format: PDF
Pages: 88