Skoda Octavia III 2013, Octavia III 2014 Gearbox 0D9-DSG Workshop Manual (Edition 03.2015)
Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
Repair Group
- 00 – Technical data
- 30 – Clutch
- 34 – Controls, housing
- 35 – Gears, shafts
- 39 – Final drive – differential
CONTENTS
- 00 – Technical data
- 1 Technical Data for the Gearbox
- 1.1 Identification of the gearbox
- 1.2 Read off the gearbox identification characters
- 1.3 Identification characters, aggregate assignment, ratios
- 1.4 Filling capacity
- 2 Notes on 6-speed automatic gearbox DSG – 0D9
- 2.1 Notes on tow starting and towing
- 2.2 General repair instructions
- 2.3 Contact corrosion
- 2.4 Safety functions of the gearbox control unit
- 2.5 General safety instructions
- 2.6 Safety precautions when working on vehicles with a start/stop system
- 2.7 Safety precautions during road tests in which testing and measuring equipment is used
- 2.8 Explanation of the terms used in this workshop manual
- 1 Technical Data for the Gearbox
- 30 – Clutch
- 1 Components of the clutch
- 1.1 Summary of components
- 2 Removing and installing clutch
- 2.1 Removing the clutch cover
- 2.2 Installing the clutch cover
- 2.3 Removing clutch
- 2.4 Preparing the installation of the clutch
- 2.5 Installing and adjusting the clutch
- 1 Components of the clutch
- 34 – Controls, housing
- 1 Electric/electronic components, fitting locations for the automatic gearbox DSG – 0D9
- 2 Oil pan, mechatronics, gearbox oil pump
- 2.1 Summary of components – Tightening torques
- 3 Removing and installing oil pan
- 3.1 Removing the oil pan
- 3.2 Installing the oil pan
- 4 Mechatronics for double clutch gearbox J743
- 4.1 Removing mechatronics for double clutch gearbox J743
- 4.2 Installing mechatronics for double clutch gearbox J743
- 5 Removing and installing gearbox oil cooler
- 5.1 Removing
- 5.2 Install
- 6 Removing and installing gearbox oil pump
- 6.1 Removing
- 6.2 Install
- 7 Replace the gasket ring of the gearshift shaft
- 8 Shift mechanism
- 8.1 Inspecting the gearshift mechanism
- 8.2 Inspecting and adjusting the selector lever control cable
- 8.3 Check the function of the ignition key removal lock
- 8.4 Summary of components – Gearshift mechanism
- 8.5 Removing and Installing the cover for the shift mechanism
- 8.6 Removing and installing handle for shift mechanism
- 8.7 Installing the lock button at the selector lever handle
- 8.8 Removing and installing selector mechanism
- 8.9 Removing and installing the selector lever control cable
- 8.10 Emergency release of gearshift mechanism out of position “P”
- 8.11 Removing and installing the Tiptronic switch F189
- 8.12 Removing and installing selector lever lock solenoid N110
- 8.13 Removing and installing selector lever switch locked in P F319
- 8.14 Removing and installing the selector lever sensor control unit J587
- 8.15 Checking the plug connections at the gearshift mechanism
- 9 Removing and installing the gearbox
- 9.1 Removing the gearbox
- 9.2 Installing the gearbox
- 10 Transporting the gearbox and securing to the assembly stand
- 10.1 Transporting the gearbox
- 10.2 Attaching gearbox to assembly stand
- 11 Change the gearbox oil and filter of the automatic gearbox DSG and at the same time check the oil level
- 11.1 Change the gearbox oil, replace the oil filter
- 12 Angle gearbox
- 12.1 Angle gearbox – Summary of components
- 12.2 Remove angle gearbox
- 12.3 Install angle gearbox
- 12.4 Tightening torques for angle gearbox
- 35 – Gears, shafts
- 1 Pinions and shafts
- 39 – Final drive – differential
- 1 Gasket rings
- 1.1 Gasket rings- Summary of components
- 1.2 Replacing left sealing ring
- 1.3 Replacing right sealing ring
- 2 Differential gear
- 2.1 Differential gear – Summary of components
- 2.2 Removing and installing left flange shaft
- 2.3 Removing and installing right flange shaft
- 3 Parts of angle gearbox
- 3.1 Parts of angle gearbox – assembly overview
- 3.2 Replacing gasket rings for angle gearboxes
- 4 Oil for angle gearbox
- 4.1 Checking the oil level
- 4.2 Drain and fill oil
- 1 Gasket rings
Language: English
Format: PDF
Pages: 135