Skoda Octavia III 2013, Octavia III 2014 1.8L 132kW TSI; 2.0L 162kW TSI engines Workshop Manual (Edition 01.2015)
Skoda Octavia III 2013, Octavia III 2014 1.8/132 kW TSI; 2.0/162 kW TSI engines Workshop Manual (Edition 01.2015) PDF. Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
Engine ID:
- CJSA
- CJSB
- CHHB
Repair Group
- 00 – Technical data
- 10 – Removing and installing engine
- 13 – Crankshaft group
- 15 – Cylinder head, valve gear
- 17 – Lubrication
- 19 – Cooling
- 20 – Fuel supply system
- 21 – Turbocharging/supercharging
- 24 – Mixture preparation – injection
- 26 – Exhaust system
- 28 – Ignition system
CONTENTS
- 00 – Technical data
- 1 Denomination
- 10 – Removing and installing engine
- 1 Removing and installing engine trim panel
- 2 Removing and installing engine
- 3 Assembly bracket
- 13 – Crankshaft group
- 1 Cylinder block – Belt pulley side
- 2 Cylinder block – gearbox end
- 3 Crankshaft
- 4 Balancing shafts
- 5 Pistons and connecting rods
- 15 – Cylinder head, valve gear
- 1 Covers for timing chains
- 2 Chain drive
- 3 Cylinder head
- 4 Valve gear
- 17 – Lubrication
- 1 Sump, oil pump
- 2 bracket for auxiliary units with oil filter and engine oil cooler
- 3 Crankcase ventilation
- 4 Oil pressure switch
- 19 – Cooling
- 1 Cooling system
- 2 Coolant pump and positioning element for engine temperature control
- 3 Coolant pipes
- 4 Radiator and radiator fan
- 20 – Fuel supply system
- 1 Fuel tank
- 2 Separating push-on couplings
- 3 Accelerator pedal
- 4 Activated charcoal filter system
- 21 – Turbocharging/supercharging
- 1 Exhaust gas turbocharger
- 2 Charge air system with exhaust gas turbocharger
- 24 – Mixture preparation – injection
- 1 Fitting location of the injection system
- 2 Air filter
- 3 Intake manifold and fuel distributor
- 4 Injection valves
- 5 Senders and sensors
- 6 High pressure pump
- 7 Lambda probes
- 8 Engine control unit
- 26 – Exhaust system
- 1 Removing and installing parts of the exhaust system
- 28 – Ignition system
Language: English
Format: PDF
Pages: 353