Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
Repair Group
- 00 – Technical data
- 45 – Anti-lock brake system
- 46 – Brakes – mechanism
- 47 – Brakes – hydraulics
CONTENTS
- 00 – Technical data
- 1 Brakes
- 1.1 Brake variants and their assignment
- 1.2 Brake fluid
- 1.3 Brake inspection
- 1 Brakes
- 45 – Anti-lock brake system
- 1 General Instructions
- 1.1 Distinguishing features of the ABS systems
- 1.2 Instructions for repair work on ABS
- 2 Fitting location overview
- 2.1 Summary of components – ABS/ESC
- 3 Hydraulic unit, brake servo unit
- 3.1 Summary of components – hydraulic unit, brake servo unit – left-hand drive
- 3.2 Summary of components – hydraulic unit, brake servo unit – right-hand drive
- 3.3 Removing and installing control unit and hydraulic unit – left-hand drive
- 3.4 Removing and installing control unit and hydraulic unit – right-hand drive
- 3.5 Removing and installing bracket for hydraulic unit
- 4 Sensors
- 4.1 Assembly overview of the ABS speed sensor on the front axle
- 4.2 Assembly overview of the ABS speed sensor on the rear axle
- 4.3 Sensor unit for ESP G419
- 4.4 Steering angle sender G85
- 1 General Instructions
- 46 – Brakes – mechanism
- 1 Repairing front wheel brake
- 1.1 Changing the brake pads of the front brake – Mounting instructions
- 1.2 Repairing front wheel brake, brake caliper PC 57
- 1.3 Removing and installing the brake pads of the brake PC 57
- 1.4 Removing and installing the brake caliper of the brake PC 57
- 2 Repairing rear brake
- 2.1 Changing the brake pads of the rear brake – Mounting instructions
- 2.2 Repairing rear brake C 38
- 2.3 Removing and installing brake pads (C 38)
- 2.4 Removing and installing brake caliper (C 38)
- 2.5 Repairing rear brake (PC 38 HRA)
- 2.6 Removing and installing brake pads (PC 38 HRA)
- 2.7 Removing and installing brake caliper (PC 38 HRA)
- 3 Handbrake
- 3.1 Handbrake lever – Summary of components
- 3.2 Setting the hand-brake
- 3.3 Removing and installing the hand-brake cable
- 4 Brake pedal
- 4.1 Summary of components of brake pedal
- 4.2 Separating the brake pedal from the brake servo unit and clipping onto brake servo unit
- 4.3 Removing and installing brake pedal
- 4.4 Removing and installing bearing bracket
- 4.5 Removing and installing brake light switch
- 1 Repairing front wheel brake
- 47 – Brakes – hydraulics
- 1 Repairing front brake caliper
- 1.1 Repairing brake caliper C 57
- 1.2 Removing and installing the piston of the brake caliper C 57
- 2 Repairing rear brake caliper
- 2.1 Repairing brake caliper C 38
- 2.2 Repairing brake caliper PC 38 HRA
- 2.3 Removing and installing the piston of the brake caliper C 38 / PC 38 HRA
- 2.4 Pre-bleeding the brake caliper
- 3 Checking the master brake cylinder for tightness
- 4 Bleeding brake system
- 4.1 Bleeding the brake system of air with the brake filling and bleeding device
- 4.2 Change brake fluid
- 5 Brake Servo Unit/Master Brake Cylinder
- 5.1 Assembly overview – brake servo/brake master cylinder
- 5.2 Removing and installing master brake cylinder
- 5.3 Removing and installing brake servo unit
- 6 Brake line
- 6.1 Repairing brake lines .
- 6.2 Flaring tool – summary of components
- 6.3 Work instruction
- 1 Repairing front brake caliper
Language: English
Format: PDF
Pages: 82
Skoda Octavia III 2013 Brake systems Workshop Manual (Edition 12.2012) PDF free online