Skoda Octavia III 2013 Brake systems Workshop Manual (Edition 12.2012)
Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
Repair Group
- 00 – Technical data
- 45 – Anti-lock brake system
- 46 – Brakes – mechanism
- 47 – Brakes – hydraulics
CONTENTS
- 00 – Technical data
- 1 Brakes
- 1.1 Brake variants and their assignment
- 1.2 Brake fluid
- 1.3 Brake inspection
- 1 Brakes
- 45 – Anti-lock brake system
- 1 General Instructions
- 1.1 Distinguishing features of the ABS systems
- 1.2 Instructions for repair work on ABS
- 2 Fitting location overview
- 2.1 Summary of components – ABS/ESC
- 3 Hydraulic unit, brake servo unit
- 3.1 Summary of components – hydraulic unit, brake servo unit – left-hand drive
- 3.2 Summary of components – hydraulic unit, brake servo unit – right-hand drive
- 3.3 Removing and installing control unit and hydraulic unit – left-hand drive
- 3.4 Removing and installing control unit and hydraulic unit – right-hand drive
- 3.5 Removing and installing bracket for hydraulic unit
- 4 Sensors
- 4.1 Assembly overview of the ABS speed sensor on the front axle
- 4.2 Assembly overview of the ABS speed sensor on the rear axle
- 4.3 Sensor unit for ESP G419
- 4.4 Steering angle sender G85
- 1 General Instructions
- 46 – Brakes – mechanism
- 1 Repairing front wheel brake
- 1.1 Changing the brake pads of the front brake – Mounting instructions
- 1.2 Repairing front wheel brake, brake caliper PC 57
- 1.3 Removing and installing the brake pads of the brake PC 57
- 1.4 Removing and installing the brake caliper of the brake PC 57
- 2 Repairing rear brake
- 2.1 Changing the brake pads of the rear brake – Mounting instructions
- 2.2 Repairing rear brake C 38
- 2.3 Removing and installing brake pads (C 38)
- 2.4 Removing and installing brake caliper (C 38)
- 2.5 Repairing rear brake (PC 38 HRA)
- 2.6 Removing and installing brake pads (PC 38 HRA)
- 2.7 Removing and installing brake caliper (PC 38 HRA)
- 3 Handbrake
- 3.1 Handbrake lever – Summary of components
- 3.2 Setting the hand-brake
- 3.3 Removing and installing the hand-brake cable
- 4 Brake pedal
- 4.1 Summary of components of brake pedal
- 4.2 Separating the brake pedal from the brake servo unit and clipping onto brake servo unit
- 4.3 Removing and installing brake pedal
- 4.4 Removing and installing bearing bracket
- 4.5 Removing and installing brake light switch
- 1 Repairing front wheel brake
- 47 – Brakes – hydraulics
- 1 Repairing front brake caliper
- 1.1 Repairing brake caliper C 57
- 1.2 Removing and installing the piston of the brake caliper C 57
- 2 Repairing rear brake caliper
- 2.1 Repairing brake caliper C 38
- 2.2 Repairing brake caliper PC 38 HRA
- 2.3 Removing and installing the piston of the brake caliper C 38 / PC 38 HRA
- 2.4 Pre-bleeding the brake caliper
- 3 Checking the master brake cylinder for tightness
- 4 Bleeding brake system
- 4.1 Bleeding the brake system of air with the brake filling and bleeding device
- 4.2 Change brake fluid
- 5 Brake Servo Unit/Master Brake Cylinder
- 5.1 Assembly overview – brake servo/brake master cylinder
- 5.2 Removing and installing master brake cylinder
- 5.3 Removing and installing brake servo unit
- 6 Brake line
- 6.1 Repairing brake lines .
- 6.2 Flaring tool – summary of components
- 6.3 Work instruction
- 1 Repairing front brake caliper
Language: English
Format: PDF
Pages: 82
Skoda Octavia III 2013 Brake systems Workshop Manual (Edition 12.2012) PDF free online