Skoda Octavia II 2004, Octavia II 2010, Octavia III 2013, Octavia III 2014, Superb II 2008, Yeti 2010, Yeti 2011 Gearbox 0A4 Workshop Manual

Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.

Edition 07.2014

Repair Group

  • 00 – Technical data
  • 30 – Clutch
  • 34 – Controls, housing
  • 35 – Gears, shafts
  • 39 – Final drive – differential

CONTENTS

  • 00 – Technical data
    • 1 Identification
      • 1.1 Identification of the gearbox
      • 1.2 Identification characters, aggregate assignment, ratios, filling capacities (Octavia II)
      • 1.3 Identification characters, aggregate assignment, ratios, filling capacities (Octavia III)
      • 1.4 Identification characters, aggregate assignment, ratios, filling capacities (Superb II)
      • 1.5 Identification characters, aggregate assignment, ratios, filling capacities (Yeti)
    • 2 Overview of Transmission System
      • 2.1 Designation of components and transmission ratio
    • 3 General repair information
      • 3.1 Notes
      • 3.2 Contact corrosion
      • 3.3 Safety measures for working on vehicles with start/stop system
      • 3.4 Safety precautions during road tests in which testing and measuring equipment is used
      • 3.5 Components
  • 30 – Clutch
    • 1 Clutch control
    • 2 Repairing clutch control
    • 3 Repairing clutch
  • 34 – Controls, housing
    • 1 Shift mechanism
    • 2 Removing and installing the gearbox
    • 3 Check gear oil level
    • 4 Disassembling and assembling the gearbox
    • 5 Repairing gearbox housing and clutch housing
    • 6 Repairing the shift mechanism on the gearbox
    • 7 Disassembling and assembling the gearshift forks
  • 35 – Gears, shafts
    • 1 Drive shaft
      • 1.1 Disassembling and assembling the drive shaft
      • 1.2 Setting drive shaft
    • 2 Output shaft
      • 2.1 Disassembling and assembling the output shaft
      • 2.2 Setting output shaft
    • 3 Reverse shaft
      • 3.1 Disassembling and assembling the reverse shaft
  • 39 – Final drive – differential
    • 1 Replacing gasket rings for flange shafts with gearbox installed
      • 1.1 Replacing the left flange shaft gasket ring
      • 1.2 Difference between the gasket rings with right flange
      • 1.3 Replace gasket ring in separated version for right flange shaft
      • 1.4 Replace gasket ring in single version (together with bushing) for right flange shaft
    • 2 Differential gear
      • 2.1 Disassembling and assembling differential gear
      • 2.2 Adjusting the differential gear
    • 3 Setting overview

Language: English
Format: PDF
Pages: 262

Skoda Octavia II 2004, Octavia II 2010, Octavia III 2013, Octavia III 2014, Superb II 2008, Yeti 2010, Yeti 2011 Gearbox 0A4 Workshop Manual PDF free online