Skoda Octavia II 2004, Octavia II 2010, Octavia III 2013, Octavia III 2014, Superb II 2008, Superb II 2011, Yeti 2010, Yeti 2011 Propshaft and rear final drive Workshop Manual
Edition 07.2014. Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
Repair Group
- 00 – Technical data
- 39 – Final drive – rear differential
CONTENTS
- 00 – Technical data
- 1 Identification
- 1.1 Identification of rear final drive
- 2 Technical data
- 2.1 Aggregate assignment
- 2.2 Filling capacity
- 3 Repair instructions
- 3.1 General repair instructions
- 3.2 Gasket rings, O-rings, gaskets
- 3.3 Screws, nuts
- 4 Safety instructions
- 4.1 Safety precautions during road tests in which testing and measuring equipment is used
- 4.2 Safety measures for working on vehicles with start/stop system
- 5 Electrical components
- 5.1 Electric/Electronic components and fitting locations
- 1 Identification
- 39 – Final drive – rear differential
- 1 Propshaft
- 1.1 Summary of components propeller shaft
- 1.2 Removing and installing propshaft
- 1.3 Repairing propshaft
- 1.4 Removing and installing the front flexible disk
- 1.5 Removing and installing the rear flexible disk
- 2 Final drive
- 2.1 Summary of components final drive
- 2.2 Removing and installing the rear final drive
- 3 Assembly bracket
- 3.1 Assembly overview – assembly mountings
- 3.2 removing and installing rubber-metal bearing
- 4 Gasket rings
- 4.1 Overview of fitting locations
- 4.2 Replacing left sealing ring
- 4.3 Replacing right sealing ring
- 4.4 Replacing gasket ring for flange on Haldex coupling
- 5 Gear oil
- 5.1 Check gear oil level
- 6 High-performance oil for Haldex coupling
- 6.1 Check oil level in the Haldex coupling
- 6.2 Change and refill high-performance oil for Haldex coupling
- 7 Haldex coupling
- 7.1 Summary of components – Haldex coupling
- 7.2 Summary of components – control unit
- 7.3 Functional test
- 7.4 removing and installing oil filter
- 7.5 Removing and installing pump for Haldex coupling
- 7.6 Removing and installing Haldex coupling
- 7.7 Disassembling and assembling coupling
- 7.8 Removing and installing control unit
- 1 Propshaft
Language: English
Format: PDF
Pages: 170