Skoda Octavia II 2004, Octavia II 2010, Octavia III 2013, Octavia III 2014 Gearbox 0AF Workshop Manual (Edition 09.2013)

Skoda Octavia II 2004, Octavia II 2010, Octavia III 2013, Octavia III 2014 Gearbox 0AF Workshop Manual (Edition 09.2013) PDF free online

Repair Group

  • 00 – Technical data
  • 30 – Clutch
  • 34 – Controls, housing
  • 35 – Gears, shafts
  • 39 – Final drive – differential

Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.

CONTENTS

  • 00 – Technical data
    • 1 Identification of the gearbox
      • 1.1 Identification characters, aggregate assignment, ratios, filling capacities (Octavia II)
      • 1.2 Identification characters, aggregate assignment, ratios, filling capacities (Octavia III)
    • 2 Overview of Transmission System
      • 2.1 Designation of components and transmission ratio
    • 3 Safety instructions
      • 3.1 Safety measures for working on vehicles with start/stop system
    • 4 Electrical components
      • 4.1 Summary of components: Electrical components
    • 5 General repair information
  • 30 – Clutch
    • 1 Repairing clutch control
      • 1.1 Summary (Octavia II)
      • 1.2 Overview of the fitting positions: Clutch control (Octavia III)
      • 1.3 Summary of components – Foot controls (Octavia ll)
      • 1.4 Summary of components: Foot controls (Octavia III)
      • 1.5 Removing and installing bearing bush (Octavia III)
      • 1.6 Removing and installing retractor spring (Octavia II)
      • 1.7 Removing and installing retractor spring (Octavia III)
      • 1.8 Removing and installing over-centre helper spring (Octavia III)
      • 1.9 Removing and installing clutch pedal (Octavia II)
      • 1.10 Removing and installing clutch pedal (Octavia IlI)
      • 1.11 Removing and installing bearing bracket (Octavia II)
      • 1.12 Removing and installing bearing bracket for clutch pedal (Octavia III)
      • 1.13 Removing and installing master cylinder (Octavia II)
      • 1.14 Removing and installing master cylinder (Octavia IIl)
      • 1.15 Removing and installing clutch position sender G476 (Octavia II)
      • 1.16 Removing and installing clutch position sender G476 (Octavia IIl)
      • 1.17 Summary of components – Hydraulic system (Octavia ll)
      • 1.18 Summary of components: Clutch hydraulics (Octavia III)
      • 1.19 Checking the hydraulic clutch control (Octavia II)
      • 1.20 Checking the master and slave cylinder (Octavia III)
      • 1.21 Removing and installing slave cylinder (Octavia II)
      • 1.22 Removing and installing master cylinder (Octavia III)
      • 1.23 Removing and installing cables for clutch control (Octavia III)
      • 1.24 Bleeding the clutch control (Octavia II)
      • 1.25 Bleeding the clutch control (Octavia III)
    • 2 Repairing clutch control
      • 2.1 Repairing the clutch control (Octavia II)
      • 2.2 Summary of components: Clutch control (Octavia III)
      • 2.3 Repairing the clutch control (Octavia III)
    • 3 Repairing clutch
      • 3.1 Repairing the clutch (Octavia II)
      • 3.2 Summary of components: Clutch (Octavia III)
      • 3.3 Removing and installing clutch (Octavia IlI)
      • 3.4 Fault finding power transmission – problems with the clutch and clutch control (Octavia II)
  • 34 – Controls, housing
    • 1 Shift mechanism
      • 1.1 Fitting location of shift mechanism
      • 1.2 Summary of components shift mechanism (Octavia ll)
      • 1.3 Summary of components – gearshift knob with shift lever collar (Octavia II)
      • 1.4 Summary of components: Gear shift knob and shift lever collar (Octavia III)
      • 1.5 Removing and installing gearshift knob and shift lever collar (Octavia II)
      • 1.6 Removing and installing gear shift knob (Octavia IlI)
      • 1.7 Summary of components – Shift mechanism up to 10.2006 (Octavia II)
      • 1.8 Summary of components – Shift mechanism as of 11.2006 (Octavia II)
      • 1.9 Disassembling and assembling shift mechanism as of 11.2006 (Octavia II)
      • 1.10 Summary of components – Control cables up to 10.2006 (Octavia II)
      • 1.11 Summary of components – Control cables as of 11.2006 (Octavia II)
      • 1.12 Plastic relay lever (Octavia II)
      • 1.13 Summary of components: Gearshift mechanism (Octavia III)
      • 1.14 Removing and installing shift mechanism (Octavia II)
      • 1.15 Removing and installing shift mechanism and selector cable (Octavia II)
      • 1.16 Remove and install shift mechanism (Octavia IlI)
      • 1.17 Setting shift mechanism (Octavia II)
      • 1.18 Setting shift mechanism (Octavia IlI)
    • 2 Removing and installing the gearbox
      • 2.1 Removing gearbox (Octavia II)
      • 2.2 Removing gearbox (Octavia III)
      • 2.3 Transporting the gearbox
      • 2.4 Install gearbox (Octavia II)
      • 2.5 Installing gearbox (Octavia III)
    • 3 Check gear oil level
    • 4 Disassembling and assembling the gearbox
      • 4.1 Gearbox – Summary of components
      • 4.2 Summary of components
      • 4.3 Removing and installing gearbox housing cover and 5th gear
      • 4.4 Detaching and attaching clutch housing
      • 4.5 Removing and installing the drive shaft, output shaft, differential gear, shift mechanism and gearshift forks
      • 4.6 Mounting sequence
    • 5 Repairing gearbox housing and clutch housing
    • 6 Repairing shift mechanism
      • 6.1 Replacing the gasket ring for the gearshift shaft
    • 7 Disassembling and assembling the gearshift forks
  • 35 – Gears, shafts
    • 1 Drive shaft
      • 1.1 Disassembling and assembling the drive shaft
      • 1.2 Replace gasket ring for drive shaft
    • 2 Output shaft
      • 2.1 Disassembling and assembling the output shaft
  • 39 – Final drive – differential
    • 1 Gasket rings
      • 1.1 Overview of the fitting positions: Gasket rings
      • 1.2 Replacing the left flange shaft gasket ring (on an installed gearbox)
      • 1.3 Replacing the right flange shaft gasket ring (on an installed gearbox)
    • 2 Differential gear
      • 2.1 Disassembling and assembling differential gear
      • 2.2 Adjusting the differential gear

Language: English
Format: PDF
Pages: 182

Skoda Octavia II 2004, Octavia II 2010, Octavia III 2013, Octavia III 2014 Gearbox 0AF Workshop Manual (Edition 09.2013) PDF free online

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More