Skoda Octavia 1997 Workshop (S00.5135.50.20) 1.6L 75kW Engine, Fuel Injection and Ignition System
Skoda Octavia 1997 Workshop (S00.5135.50.20) 1.6L / 75 kW Engine, Fuel Injection and Ignition System PDF. Engine code: AVU, BFQ
CONTENTS
- 01 – Self-diagnosis
- Self-diagnosis I
- – Operation
- – Technical data of self-diagnosis
- – Connecting up the vehicle system tester -V.A.G 1552- and selecting the control unit for engine electronics
- – Interrogating and erasing fault memory
- – Performing actuator diagnosis
- Self-diagnosis II
- – Fault codes 16486 … 16990
- Self-diagnosis III
- – Fault codes 17040 … 18088
- Self-diagnosis IV
- – Readiness code
- – Reading readiness code
- – Generating readiness code
- Self-diagnosis V
- – Reading measured value block
- – Display groups 001 up to 028
- Self-diagnosis VI
- – Reading measured value block – display groups 030 to 132
- Self-diagnosis I
- 24 – Fuel Formation, Injection
- Fuel Injection System
- – Safety measures
- – Rules of cleanliness
- – Overview of fitting locations
- – General notes on the injection system
- – Removing and installing parts of the injection system
- – Disassembling and assembling fuel distributor with injectors
- – Disassembling and assembling top part of intake manifold
- – Disassembling and assembling the air filter
- – Resistances for intake air temperature sender -G42-
- – Resistances for the coolant temperature sender -G62-
- Testing components
- – Test wiring and components with Test box -V.A.G 1598/31-
- – Inspecting the injection rate, tightness and jet formation of the injectors
- – Test fuel pressure regulator and holding pressure
- – Testing the intake system for tightness (unmetered air)
- – Testing brake vacuum pump -V192-
- Inspecting functions
- – Testing idling speed
- – Testing the intake manifold changeover
- Lambda control
- – Testing lambda probe -G39- and lambda control upstream of catalytic converter
- – Testing lambda probe -G130- and lambda control downstream of catalytic converter
- – Test of ageing of lambda probe upstream of catalytic converter -G39-
- Electronic Engine Power Control (Electronic throttle)
- – Inspecting fault lamp for the EPC
- – Testing throttle valve control unit -J338-
- – Testing Accelerator pedal position sender
- Engine control unit
- – Operation
- – Replacing engine control unit
- – Coding engine control unit
- – Adapting the 4AV control unit to the throttle valve control unit -J338-
- – Adapting EGR valve
- – Activating and deactivating cruise control system (CCS)
- – Learning kickdown operating point
- Testing auxiliary signals
- – Testing signal from high pressure sender for the air conditioning system -G65-
- – Testing the speed signal
- – Checking the data BUS
- Fuel Injection System
- 28 – Ignition System
- Ignition System
- – General notes on the ignition system
- – Safety measures
- – Removing and installing ignition system
- – Inspecting the camshaft position sensor -G163-
- Ignition System
Language: English
Format: PDF
Pages: 110