Skoda Fabia 2000 Electrical System

The Skoda Fabia 2000 is a popular car known for its fuel efficiency and reliability. However, like any vehicle, it requires regular maintenance to keep it running smoothly. That’s where our comprehensive guide to the Fabia’s electrical system comes in.

Our guide includes detailed information on every aspect of the Fabia’s electrical system, from fuses and relays to wiring diagrams and component locations. Whether you’re a seasoned mechanic or a DIY enthusiast, our guide will provide you with the knowledge you need to keep your Fabia in top condition.

One of the most important aspects of maintaining any vehicle is understanding its electrical system. Our guide includes troubleshooting tips and common issues that can arise with the Fabia’s electrical system. From faulty alternators to dead batteries, our guide covers it all.

But our guide isn’t just for maintenance and repairs. We also cover important topics such as safety features, driving tips, and fuel efficiency to help you get the most out of your Fabia. With our guide, you’ll be able to enjoy your vehicle to the fullest while ensuring its longevity and reliability.

In conclusion, if you own a Skoda Fabia 2000, our comprehensive guide to its electrical system is an essential resource that you simply can’t do without. Order your copy today and get ready to take your Fabia to the next level!

CONTENTS:

Starter, Power supply
Battery 
– Battery handling instructions
– Inspecting electrolyte level
– Measuring no-load voltage
– Measuring voltage under load
– Testing electrolyte density
– Charging battery
– Battery with a magic eye
– Removing and installing the battery
– Removing and installing the battery tray
Starter
– Removing and installing the starter
Alternator
– Removing and installing the alternator
– Checking the carbon brushes of the AC generator
– Removing and installing the voltage regulator
– Removing and installing the V-ribbed belt pulley on the AC generator
– Removing and installing the V-ribbed belt pulley with free wheel
Removing and installing the cruise control (CC)
– Gauges, Instruments
Dash panel insert
– Removing and installing the dash panel insert
– Contact assignment of plug connections on the dash panel insert
– Warning light symbols in dash panel insert
– Service interval display
Self-diagnosis of the dash panel insert I
– General Instructions
– Initiating self-diagnosis of the dash panel insert
– Interrogating fault memory
– Erasing fault memory
– Ending output
Self-diagnosis of the dash panel insert II 
– Fault table for the dash panel insert
– Actuator diagnosis
– Coding dash panel insert
Self-diagnosis of the dash panel insert III 
– Reading measured value block
– Adjustment
– Adapting odometer reading
– Adjusting the service interval display when replacing the dash panel insert (QG0)
– Adapting the service interval display when replacing the dash panel insert (QG1 and QG2)
– Adjust momentary fuel consumption gauge
– Adjustment of the speedometer constant when replacing the dash panel insert
– Testing fuel gauge (adjustment)
– Performing the log-in procedure
Self-diagnosis of the electric system control unit I
– Initiating self-diagnosis
– Interrogating fault memory
– Erasing fault memory
– Ending output
Self-diagnosis of the vehicle voltage control unit II
– Fault table for the vehicle voltage control unit
– Actuator diagnosis
– Coding the vehicle voltage control unit
Self-diagnosis of the vehicle voltage control unit III
– Reading measured value block .
– Adjustment
Self-diagnosis of the Gateway
– Initiating self-diagnosis
– Interrogating fault memory
– Fault table for the Gateway
– Erasing fault memory
– Ending output
– Coding control unit
– Reading measured value block
Data BUS
– Checking the data BUS drive
– Checking the data BUS Comfort version
– Radio, Two-Way Radio, Mobile Phone
Radio systems I
– General Instructions
– Overview of radio systems
– Removing and installing radio
– Removing and installing loudspeakers
– Removing and installing the roof aerial
– Removing and installing the concealed navigation system aerial
– Contact assignment of multipin plug connections A, B, C on rear of radio
Radio systems II 
– Self-diagnosis of radio system
Radio-Navigation System (RNS) I 
– General description
– Self-diagnosis of radio unit in RNS
– Self-diagnosis of navigation unit in the RNS I
Radio-Navigation System (RNS) II 
– Self-diagnosis of navigation unit in RNS II
– Electronic anti-theft lock
– Plug connections at Radio-Navigation System
– Removing and installing Radio-Navigation System
– Control unit for traffic information over the radio -J559- (TMC box)
Telephone preinstallation
– Telephone preinstallation 1
– Connector assignment (item 5)
– Telephone preinstallation 2
– Connector assignment
– Assembly overview of mobile phone mount
– Removing and installing telephone operating electronics control unit -J412-
– Removing and installing microphone
CD changer
– General instructions
– Removing and installing CD changer
– Windscreen Wiper and Washer System
Windscreen Washer System
– Removing and installing windshield washer fluid reservoir
– Removing and installing spray nozzles for windscreen washer system
Windscreen Wiper and Washer System 
– Removing and installing the windscreen wiper and washer system
– Setting park position of windscreen wiper blades
– Removing and installing wiper rubber
Rear Window Wiper and Washer System 
– Rear window wiper system – Summary of components
– Removing and installing rear window wiper
– Setting park position of rear window wiper
– Adjusting the spray nozzles
– Replacing spray nozzle FABIA
– Replacing spray nozzle FABIA Combi
Headlamp cleaning system 
– Summary of components
– Adjusting the spray nozzles
– Removing and installing the spray nozzle holder
– Removing and installing the cylinder
– Exterior Lights, Bulbs and Switches
Main headlight – halogen headlight
– Summary of components
– Removing and installing headlight
– Adjust the fog light beam
– Replacing bulbs in headlights
– Replacing bulb for low beam light
– Replacing bulb for the side light
– Replacing bulb for the turn signal light
– Replacing bulb for the main beam
– Replacing bulb for the fog light
– Removing and installing the headlight range control motor
– Ungluing a halogen headlight
– Replace headlight fixing brackets
Side Turn Signal Lamps
– Removing and installing side turn signal lamps .
Rear Lamps
– Assembly overview
– Removing and installing bulb holder and bulbs
– Removing and installing rear lamp
Licence Plate Lighting 
– Removing and installing licence plate light
Additional brake light 
– Removing and installing additional brake light – FABIA
– Removing and installing additional brake light – FABIA Combi
Steering column switch 
– Removing and installing steering column switch
– Removing and installing lock cylinder
– Contact assignment at ignition/starter switch
Alarm system
– Removing and installing alarm system with own power supply H12
– Replacing the own power supply of the alarm system
– Removing and installing lid switch F120
Parking aid 
– Overall view of parking aid
– Removing and installing parking aid control unit
– Removing and installing parking aid senders
– Self-diagnosis of parking aid (parking system)
Headlight – xenon light 
– A general overview
– Summary of components
– Removing and installing headlight
– Setting the headlight beam
– Replacing bulbs in headlights
– Removing and installing the D2S discharge lamp
– Removing and installing ignition-high voltage unit
– Removing and installing the headlight range control motor
– Removing and installing the transmitter with rear controller
– Installing the rear transmitter
– Connection identification of the Xenon headlamps
– Switching over the headlight-inner aperture
– Replacing headlight fixing brackets
Self diagnosis for the xenon headlight 
– Self diagnosis for the xenon headlight with automatic regulation
– Fault table
– Final control diagnosis
– Initiating basic setting
– Erasing fault memory
– Ending output
– Coding control unit
– Reading measured value block
Interior Lights, Bulbs and Switches
Self-diagnosis of immobiliser
– Initiating self-diagnosis of immobilizer
– Interrogating fault memory
– Fault table for immobiliser
– Erasing fault memory
– Ending output
– Reading measured value block
– Adapt ignition key
– Adapt immobiliser after replacing the dash panel insert
– Adapt immobiliser after replacing the engine control unit
– Adapt immobiliser after insertion of a used engine control unit
Interior Lights 
– Removing and installing glove box light
– Removing and installing door warning lamp
– Removing and installing luggage compartment light
– Removing and installing switch for sun roof and interior light
Switches in Dash Panel and in Doors 
– Removing and installing switches in centre console
– Removing and installing light switch
– Removing and installing headlight range control adjuster
– Removing and installing hazard warning light switch
– Removing and installing mirror adjustment switch
– Removing and installing power window switches
Horn 
– Removing and installing horn
Interior Monitoring Sensor G273
– Removing and installing sensor
– Check for proper operation
– Regulate sensitivity
Wiring
Fuse Holder and Relay Carrier
– Removing and installing fuse holder
– Voltage distributor
– Connector station A pillar
– Connector station B pillar
– Main fuse box
– Multi-plug connector on partition panel
Vehicle Voltage Control Unit
– Removing and installing vehicle voltage control unit

Edition 08.99 (S00.5304.00.20)
Language: English
Format: PDF
Pages: 228

Skoda Fabia 2000 Electrical System