Seat Leon 2013- Leon ST 2013- Fuel supply system – diesel engines Workshop Manual
Engine ID: CLHA, CLHB, CKFC, CUPA, CRVA, CRVC, CRMB, CKFB, CUNA, CRBC, CRLB, CRKB, CXXB, CXXA, DBKA, CRGA, CRLD, DDYA, DDYB, DCYA. Edition 02.2017. Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
List of Workshop Manual Repair Groups
Repair Group
00 – Technical data
20 – Fuel supply system
CONTENTS
- 00 – Technical data
- 1 Identification
- 1.1 Engine identification number/engine data
- 2 General instructions
- 2.1 Cleanliness specifications for working on the auxiliary heater and fuel system
- 3 Security standards
- 3.1 Safety precautions when working on the fuel system
- 3.2 Safety precautions when working on vehicles with start/stop system
- 3.3 Safety precautions during road tests in which testing and measuring equipment is used .
- 4 Repair instructions
- 4.1 Cleaning rules
- 4.2 General repair instructions
- 4.3 Foreign particles in engine
- 4.4 Contact corrosion
- 4.5 Routing and attachment of pipes, hoses and wiring
- 4.6 Installing radiators and condensers
- 1 Identification
- 20 – Fuel supply system
- 1 Procedure when filling with incorrect fuel
- 1.1 Step 1, engine was started with incorrect fuel
- 1.2 Step 2, engine was not started with incorrect fuel
- 1.3 Step 3, there are metal particles in fuel delivery unit and fuel tank
- 1.4 Step 4, there are no metal particles in fuel delivery unit and fuel tank
- 1.5 Step 5, there are metal particles in high-pressure pump
- 1.6 Step 6, there are no metal particles in high-pressure pump
- 2 Fuel tank
- 2.1 Assembly overview – fuel tank
- 2.2 Removing and installing fuel tank
- 2.3 Emptying fuel tank
- 2.4 Removing and installing misfuelling prevention device
- 2.5 Deactivating protection against filling with incorrect fuel
- 3 Fuel delivery unit, fuel gauge sender
- 3.1 Assembly overview – fuel delivery unit, fuel gauge sender
- 3.2 Removing and installing fuel delivery unit, fuel gauge sender
- 3.3 Removing and installing the fuel gauge sender G
- 3.4 Removing and installing fuel gauge sender 2 G169
- 4 Quick-release couplings
- 4.1 Separating push-on couplings
- 5 Fuel filter
- 5.1 Assembly overview – fuel filter
- 5.2 Removing and installing
- 5.3 Fuel
- 6 Accelerator control
- 6.1 Assembly overview – accelerator module
- 6.2 Removing and installing accelerator pedal module with accelerator position sender G79 / G185
- 7 Fuel pump
- 7.1 Checking fuel system pressurisation pump G6
- 7.2 Removing and installing suction-jet pump
- 7.3 Removing and installing fuel pump control unit J538
- 7.4 Checking suction-jet pump
- 1 Procedure when filling with incorrect fuel
Language: English
Format: PDF
Pages: 110
Seat Leon 2013- Leon ST 2013- Fuel supply system – diesel engines Workshop Manual