Hyundai Getz Body Repair Manual

This Body Repair Manual provides detailed repair procedures for repair of commonly damaged structural panels on the Hyundai Getz. To aid in the information of the damaged vehicle, body construction, replacement parts, body dimensions, body sealing locations, corrosion protection and body repair procedures are contained herein.

The repair procedures specify locations where body members may be structurally sectioned.

All of the repair procedures have been performed on Hyundai Getz body shells and that is currently available in most auto body repair shops.

The repair procedures illustrated in this manual were developed to simplify body repair in order to reduce insurance costs, and indirectly, cost of ownership.

The vehicle should not be sectioned in locations other than those illustrated in this repair manual. Furthermore, these repair procedures DO NOT apply to any other vehicle. The individuals performing the work must assume full responsibility for the quality of their workmanship.

We believe this manual to be helpful for Hyundai dealers, and anticipate it to be effectively used for Hyundai vehicle bodies.

For the services of other than collision-damaged body parts of the Hyundai Getz, refer to the Getz shop manual.

The illustrations and descriptive text in this manual were correct at the time of printing. It is the policy of HYUNDAI MOTOR COMPANY to continuously improve its products.

Specifications and procedures are subject to change at any time without notice.

CONTENTS

  • GENERAL INFORMATION
    • GENERAL GUIDELINES AND PRECAUTIONS
    • SRS AIR-BAG
    • ELECTRONIC PARTS
    • CORROSION PROTECTION AND SEALING
    • SIDE BODY PANELS
    • WELDING
  • BODY CONSTRUCTION
    • BODY COMPONENTS
    • ZINC-GALVANIZED STEEL PANELS
    • HIGH-STRENGTH STEEL PANELS
    • FRONT BODY
    • SIDE BODY
    • FLOOR
    • REAR BODY
    • FENDER & HOOD
    • ROOF
    • DOOR
    • TAIL GATE
  • REPLACEMENT PARTS
    • FRONT BODY
    • SIDE BODY
    • REAR BODY
    • DOOR
  • BODY DIMENSIONS
    • MEASUREMENT METHOD
    • UPPER BODY
    • SIDE BODY
    • INTERIOR
    • UNDER BODY
    • ENGINE COMPARTMENT
    • LUGGAGE COMPARTMENT
  • BODY PANEL REPAIR PROCEDURE
    • FENDER APRON PANEL (PARTIAL)
    • FENDER APRON AND FRONT SIDE MEMBER (ASSEMBLY)
    • FRONT SIDE MEMBER (PARTIAL)
    • FRONT PILLAR
    • CENTER PILLAR
    • SIDE SILL (ASSEMBLY)
    • SIDE SILL (PARTIAL)
    • QUARTER PANEL
    • REAR FLOOR
    • REAR SIDE MEMBER (ASSEMBLY)
    • REAR SIDE MEMBER (PARTIAL)
    • FRONT AND REAR DOOR OUTER PANELS
  • BODY SEALING LOCATIONS
    • FLOOR
    • UPPER & SIDE BODY
  • CORROSION PROTECTION
    • ZINC-GALVANIZED STEEL PANELS
    • ZINC-PHOSPHATE COAT & CATIONIC ELECTODEPOSITION PRIMER
    • ANTI-CORROSION PRIMER
    • ANTIVIBRATION PADS-LOCATION & SECTION
    • ATTACHMENT OF ANTIVIBRATION PADS
    • UNDER BODY COAT
    • SIDE BODY
    • CAVITY WAX INJECTION
    • UNDER BODY ANTI-CORROSION AGENT

Language: English
Format: PDF
Pages: 137

Hyundai Getz Body Repair Manual

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More