Case Fault Codes
Welcome to the Case Fault Codes section! Here you will find comprehensive guides and instructions for diagnosing and troubleshooting fault codes on your Case equipment. Our team of experts is dedicated to providing you with top-quality materials and updates. Please check back often for the latest fault code guides. Thank you for choosing Case Fault Codes!
Case MX/TG Fault codes list
ENGINE 111 Engine Controller Failure – Hardware Failure 115 Engine Speed Sensor signal is failed (no signal at engine controller pin A17) 121 Engine Position....
CASE STX Steiger 350/400/450/500/550/600 Fault Codes
Fault Code list ordered by Control Module 1002 – Short circuit to 12 V or malfunction of the winding chain of the lift valve hitch....
Clearing Fault Codes on Case Machinery: A Step-by-Step Guide
Clearing fault codes from equipment or vehicles depends on the specific make, model, and available diagnostic tools. Typically, a diagnostic scanner is required to read....
Comprehensive Guide to Case AFX8010 Fault Codes: Diagnosis and Solutions
Fault Codes for Fuel injector The fuel actuators (2) are an integral fuel injector and solenoid assembly mounted in the cylinder head. The fuel injectors....
Fault codes for CASE wheel loaders
CODE / DEFINITION 12110 Engine coolant temperature is 110° C (230° F) or greater 12900 Engine coolant temperature sensor short circuit measuring less than 50....
Understanding and Troubleshooting Fault Codes on CASE Wheel Loaders
CODE / DEFINITION 12110 Engine coolant temperature is 110° C (230° F) or greater 12900 Engine coolant temperature sensor short circuit measuring less than 50....
