Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.
Repair Group
- 00 – Technical data
- 13 – Crankshaft group
- 37 – Controls, housing
- 38 – Gears, control
- 39 – Final drive – differential
CONTENTS
- 00 – Technical data
- 1 Gearbox identification
- 2 Notes on CVT gearbox type “multitronic 01J (front-wheel drive)”
- 3 Code letters, gearbox allocation, ratios, equipment
- 4 Capacities
- 5 Notes on towing
- 6 Repair instructions
- 6.1 Contact corrosion!
- 6.2 General repair instructions
- 6.3 Rules for cleanliness when working on the gearbox
- 13 – Crankshaft group
- 1 Damper unit, for description refer to: Engine, mechanics; Repair group 13
- 37 – Controls, housing
- 2 Checking ignition key removal lock
- 3 Checking selector mechanism
- 4 Servicing selector mechanism
- 4.1 Exploded view – selector mechanism cover, selector lever handle
- 4.2 Removing and installing selector lever handle
- 4.3 Removing and installing selector mechanism cover
- 4.4 Removing and installing tiptronic switch F189
- 4.5 Exploded view – selector mechanism
- 4.6 Operating manual release for selector mechanism
- 4.7 Removing and installing manual release mechanism
- 4.8 Removing and installing shift unit
- 4.9 Selector lever cable – exploded view of components
- 4.10 Removing and installing selector lever cable
- 4.11 Adjusting selector lever cable
- 5 Removing and installing gearbox
- 5.1 Removing gearbox – vehicles with 3.0 ltr. MPI engine
- 5.2 Installing gearbox – vehicles with 3.0 ltr. MPI engine
- 5.3 Removing gearbox – vehicles with 3.2 ltr. FSI engine and 2.8 ltr. FSI engine
- 5.4 Installing gearbox on vehicles with 3.2 ltr. FSI engine
- 6 Securing gearbox to assembly stand
- 7 Transporting the automatic gearbox
- 8 Removing and installing gearbox mounting and gearbox support
- 8.1 Removing and installing gearbox mounting and gearbox support (left-side)
- 8.2 Removing and installing gearbox mounting and gearbox support (right-side)
- 9 Checking ATF level and changing ATF
- 9.1 Checking ATF level
- 9.2 Changing ATF or filling up after performing repairs
- 10 Servicing ATF cooling system on vehicles with 3.0 ltr. MPI engine
- 10.1 Removing and installing ATF pipes
- 10.2 Cleaning ATF pipes and ATF cooler
- 10.3 Removing and installing additional ATF filter
- 10.4 Removing and installing additional ATF cooler
- 10.5 Removing and installing bracket for additional ATF filter and additional ATF cooler
- 11 Servicing ATF cooling system on vehicles with 3.2 ltr. FSI engine and 2.8 ltr. FSI engine
- 11.1 Removing and installing ATF pipes
- 11.2 Cleaning ATF pipes and ATF cooler
- 11.3 Removing and installing additional ATF filter
- 11.4 Removing and installing additional ATF cooler
- 11.5 Removing and installing bracket for additional ATF filter and additional ATF cooler
- 38 – Gears, control
- 1 Dismantling and assembling gearbox
- 1.1 Removing and installing end cover
- 1.2 Removing and installing automatic gearbox control unit J217
- 1.3 Cleaning selector shaft
- 1.4 Removing and installing hydraulic control unit
- 1.5 Removing and installing input shaft
- 1 Dismantling and assembling gearbox
- 39 – Final drive – differential
- 1 Checking gear oil in front final drive
- 2 Servicing front final drive
- 2.1 Removing and installing flange shaft (left-side)
- 2.2 Removing and installing flange shaft (right-side)
- 2.3 Renewing flange shaft oil seal (left-side)
- 2.4 Renewing oil seal and grooved ball bearing for flange shaft (right-side)
- 2.5 Removing and installing cover for front final drive
Language: English
Format: PDF
Pages: 113
Audi A8 2003 multitronic 01J, front-wheel drive Workshop Manual (Edition 11.2007) PDF free online