Audi A8 2003 multitronic 01J, front-wheel drive Workshop Manual (Edition 11.2007)

Audi A8 2003 multitronic 01J, front-wheel drive Workshop Manual (Edition 11.2007) PDF. Technical information should always be available to the foremen and mechanics, because their careful and constant adherence to the instructions is essential to ensure vehicle road-worthiness and safety. In addition, the normal basic safety precautions for working on motor vehicles must, as a matter of course, be observed.

Repair Group

  • 00 – Technical data
  • 13 – Crankshaft group
  • 37 – Controls, housing
  • 38 – Gears, control
  • 39 – Final drive – differential

CONTENTS

  • 00 – Technical data
    • 1 Gearbox identification
    • 2 Notes on CVT gearbox type “multitronic 01J (front-wheel drive)”
    • 3 Code letters, gearbox allocation, ratios, equipment
    • 4 Capacities
    • 5 Notes on towing
    • 6 Repair instructions
      • 6.1 Contact corrosion!
      • 6.2 General repair instructions
      • 6.3 Rules for cleanliness when working on the gearbox
  • 13 – Crankshaft group
    • 1 Damper unit, for description refer to: Engine, mechanics; Repair group 13
  • 37 – Controls, housing
    • 2 Checking ignition key removal lock
    • 3 Checking selector mechanism
    • 4 Servicing selector mechanism
      • 4.1 Exploded view – selector mechanism cover, selector lever handle
      • 4.2 Removing and installing selector lever handle
      • 4.3 Removing and installing selector mechanism cover
      • 4.4 Removing and installing tiptronic switch F189
      • 4.5 Exploded view – selector mechanism
      • 4.6 Operating manual release for selector mechanism
      • 4.7 Removing and installing manual release mechanism
      • 4.8 Removing and installing shift unit
      • 4.9 Selector lever cable – exploded view of components
      • 4.10 Removing and installing selector lever cable
      • 4.11 Adjusting selector lever cable
    • 5 Removing and installing gearbox
      • 5.1 Removing gearbox – vehicles with 3.0 ltr. MPI engine
      • 5.2 Installing gearbox – vehicles with 3.0 ltr. MPI engine
      • 5.3 Removing gearbox – vehicles with 3.2 ltr. FSI engine and 2.8 ltr. FSI engine
      • 5.4 Installing gearbox on vehicles with 3.2 ltr. FSI engine
    • 6 Securing gearbox to assembly stand
    • 7 Transporting the automatic gearbox
    • 8 Removing and installing gearbox mounting and gearbox support
      • 8.1 Removing and installing gearbox mounting and gearbox support (left-side)
      • 8.2 Removing and installing gearbox mounting and gearbox support (right-side)
    • 9 Checking ATF level and changing ATF
      • 9.1 Checking ATF level
      • 9.2 Changing ATF or filling up after performing repairs
    • 10 Servicing ATF cooling system on vehicles with 3.0 ltr. MPI engine
      • 10.1 Removing and installing ATF pipes
      • 10.2 Cleaning ATF pipes and ATF cooler
      • 10.3 Removing and installing additional ATF filter
      • 10.4 Removing and installing additional ATF cooler
      • 10.5 Removing and installing bracket for additional ATF filter and additional ATF cooler
    • 11 Servicing ATF cooling system on vehicles with 3.2 ltr. FSI engine and 2.8 ltr. FSI engine
      • 11.1 Removing and installing ATF pipes
      • 11.2 Cleaning ATF pipes and ATF cooler
      • 11.3 Removing and installing additional ATF filter
      • 11.4 Removing and installing additional ATF cooler
      • 11.5 Removing and installing bracket for additional ATF filter and additional ATF cooler
  • 38 – Gears, control
    • 1 Dismantling and assembling gearbox
      • 1.1 Removing and installing end cover
      • 1.2 Removing and installing automatic gearbox control unit J217
      • 1.3 Cleaning selector shaft
      • 1.4 Removing and installing hydraulic control unit
      • 1.5 Removing and installing input shaft
  • 39 – Final drive – differential
    • 1 Checking gear oil in front final drive
    • 2 Servicing front final drive
      • 2.1 Removing and installing flange shaft (left-side)
      • 2.2 Removing and installing flange shaft (right-side)
      • 2.3 Renewing flange shaft oil seal (left-side)
      • 2.4 Renewing oil seal and grooved ball bearing for flange shaft (right-side)
      • 2.5 Removing and installing cover for front final drive

Language: English
Format: PDF
Pages: 113

Audi A8 2003 multitronic 01J, front-wheel drive Workshop Manual (Edition 11.2007) PDF free online